Stackable PE crane support plate Base plate / middle plate
Unevenness can be compensated by placing several stackable crane support plates underneath.
The stacking plates (middle plates) are provided with a milled out section 10mm deep, and on the other side with a raised section of 8mm.
The base plates are milled in 10mm deep on one side.
Dimension of the milling 250 x 250mm
The plates are thus secured against slipping and twisting.
Design: bevelled on all sides, provided with a high-quality carrying loop.
Our standard delivery program:
|Dimensions in mm||Weight||Plate thickness |
Foot pl. / Middle pl.
|400 x 400 x 50||7,5 kg||50 / 40 mm||16 to*|
|400 x 400 x 60||9 kg||60 / 50 mm||18 to*|
|600 x 600 x 50||17,5 kg||50 / 40 mm||20 to*|
|600 x 600 x 60||21 kg||60 / 50 mm||22 to*|
|800 x 800 x 50||31 kg||50 / 40 mm||24 to*|
|800 x 800 x 60||37 kg||60 / 50 mm||26 to*|
Please ask for other dimensions and larger quantities!
Illustration similar, colour and corner design can vary depending on stock.
* approximate values, the actual supporting force depends on the soil class/soil properties and the bearing surface of the crane's own support base plate. The supporting surface and the thickness of the crane plate must always be adapted to the conditions found, if necessary a ground survey and load statics must be prepared. The plates must be secured against slipping.
We point out that the use of the products must be adapted to the local conditions and the materials used. No guarantee can be given for this.
Our support plates consist of high-quality, pressed, flexible and high-strength plastic. ( no inferior recycled material ! ) edges deburred all around, stable hand strap for easier transport The support plates are manufactured in Germany. Our plastic products are free of carcinogenic PAK (polycyclic aromatic hydrocarbons), therefore they do not damage the ground water and are therefore suitable for use in nature and water protection areas. RZ-Handel can hereby confirm that in the production of RZ plastic sheets made of UHMW and HMW, the hazardous substances mentioned in the directive 2001/65/EU, such as lead, mercury, cadmium, chromium VI, polybrominated bibhenyls and polybrominated diphenyl ethers are neither intentionally used nor added. This also applies to the temporary directive 2011/65/EU of the European Union Our support plates are resistant to acids, alkalis, salts and salt solutions, alcohols, oils, fats, waxes and many solvents.